Construction details of artificial turf experience
No matter what type of artificial turf, the foundation is valued during construction. At present, the common is the cement foundation, asphalt foundation, and gravel foundation. Although many artificial turf are constructed on dirt roads, it is also compacted and flat. Gap pavement, and whether it is filled lawn or non-filled lawn, we must pay attention to the foundation before construction. Only after ensuring that the foundation pavement is flat and free of unevenness can we do the subsequent construction. If there is a special drainage system or drainage Ditch is naturally the best.
Glue is required for sports turf construction, and many artificial turf are constructed outdoors on sports grounds. Therefore, the temperature, humidity and weather conditions of the construction site are required. For example, the temperature must reach at least five degrees Celsius, and Construction under high humidity conditions such as the rainy weather will also affect the use of glue, so you should still survey the site before you understand the weather and environment, and develop a corresponding construction plan.
Real construction often requires experienced construction personnel. For example, when cutting lawn, you should increase the actual size. Also, pay attention to the height of the grass silk during construction. This is not only beautiful, but also the direction of sunlight will be the same in future use. Therefore, the wear condition of the entire lawn is also the same, and there will not be a situation where the wear degree of the same lawn varies with the increase of the use time. In addition, quartz sand and rubber particles can be filled according to different site uses and lawn heights. Some inexperienced construction masters have no clear requirements for the filling, so many people fill it randomly, and the filling amount does not meet the site use standards. After the field has been used for a long time, there will be bumps and bumps, and the bottom of the lawn will be exposed. Therefore, the filler should be filled to two-thirds of the lawn.