Sales Popup
Surat, Gujarat
6 hours ago
Daily maintenance methods for metal gardening tools

  keep clean

  After daily work, the manual gardening tools should be used to sort out the used tools, remove dirt and debris, dry them, and put them in a ventilated place to keep them dry and avoid rust.

  Protective edge

  For the part with the cutting edge in the gardening tool, special attention should be paid to the protection. When storing, it should be fully immersed in oil. It is best to wrap it with wax paper to avoid tilting and overlapping, to prevent compression and bending deformation, and to sharpen the cutting edge part. Tools to ensure sharpening angle and extend service life.


  When the operation is over, when it is idle for a long time, it should be properly kept, cleaned, dried, and rust-proof oil on the metal surface. Place it in a proper position. It should be stored on a shelf designed for different garden tools. Layer extrusion; place in a ventilated and dry place.

  Pay attention to rust prevention

  The working parts of gardening tools are mostly made of metal materials, and the metal materials are easy to rust. Once rusted, the light will affect the use, but the weight may lose its use value, and it is not easy to remove after rusting. Therefore, special attention should be paid during use. Anti-rust treatment.

Leave a comment (all fields required)